===== Setting up the Scanner for Track and Trace 2.0 =====

This chapter will describe, in detail, how to set up the Symbol Zebra TC70 scanner for use with the Track and Trace 2.0 system. 

==== DataWedge setup ====

=== Step 1 ===
From the main screen, start the DataWedge app.
{{ tnt2:setup:step1.jpg?200 }}

=== Step 2 ===
Choose the default profile.
{{ tnt2:setup:step2.jpg }}

=== Step 3 ===
Make sure the profile is enabled.
{{ tnt2:setup:step3.jpg }}

=== Step 4 ===
Make sure that **KEYSTROKE OUTPUT** is enabled.
{{ tnt2:setup:step4.jpg }}

=== Step 5 ===
Open **Basic data formatting** under **KEYSTROKE OUTPUT settings**, make sure that ** Send ENTER key** is enabled (the tickbox is ticked). **Send data** and **Enable** should also be ticked.
{{ tnt2:setup:step5.jpg }}

=== Step 6 ===
Open the **Advanced data formatting** under **KEYSTROKE OUTPUT settings**, Make sure the enable tickbox is ticked. Click on the **Rule0** rule.
{{ tnt2:setup:step6.jpg }}

=== Step 7 ===
From the menu, create a new action and choose **Replace string** as the action type.
{{ tnt2:setup:step7.jpg }}

=== Step 8 ===
Move the Replace string action to the top of the list by dragging the three bars on the right side of the action upwards. Leave the **Send remaining** action as it is. Click on the **Replace string** action to edit it.
{{ tnt2:setup:step8.jpg }}

=== Step 9 ===
Click on the **Find string** field, and enter the value **\x1D** and click OK.
{{ tnt2:setup:step9.jpg }}

=== Step 10 ===
In the same way, enter the value **.** in the **Replace string** box. (A period sign)
{{ tnt2:setup:step10.jpg }}

=== Step 11 ===
Use the back key on the scanner to get back to the list of profiles. Now repeat the process for all the profiles used by the scanner apps, usually the **Default profile** and the **ExplosiveScanner** profile.
{{ tnt2:setup:step11.jpg }}

=== Step 12 ===
The DataWedge configuration is now finished.

==== Install the Track and Trace 2.0 Scanner app ====

Download the correct .APK file from the Wiki or from another source. Make sure the app is configured for the site you are about to install the scanner for. Install the app on the scanner using the file manager or similar tool. Let the scanner synchronize the database, and the app is installed and ready to go!